Common Appliance Problems and Appliance Repair Winnipeg: How to Avoid Costly Fixes

If your appliance is acting up, FixUp Pro has got your back! We provide fast and reliable appliance repair Winnipeg to get your fridge, washer, dryer, or stove back in working order. Don’t let small issues turn into big problems—visit FixUp Pro today!

1. Common Refrigerator Issues

What Can Go Wrong?

• Not Cooling Properly – This could be due to dirty condenser coils, a faulty thermostat, or a compressor that’s struggling to keep up.
  
  
• Water Leaking Onto the Floor – Most often, it’s a clogged or frozen defrost drain or a cracked water line.
  
  
• Making Strange Noises – A loud fridge might have a worn-out evaporator fan or condenser fan motor.
  
  
• Ice Maker Not Working – Could be a clogged filter, water supply issue, or a faulty ice maker assembly.

How to Prevent It

• Clean the condenser coils twice a year to help your fridge cool efficiently.
  
  
• Keep the temperature at 37-40°F (3-4°C) and the freezer at 0°F (-18°C).
  
  
• Check the door seals regularly—replace them if they’re loose or cracked.
  
  
• Don’t overload the fridge; proper air circulation is key.
  
  
• Replace the water filter every 6 months for fresh ice and water.
  
  

2. Washing Machine Problems

What Might Go Right and Wrong?

• A clogged drain line, malfunctioning lid switch, or worn-out belt could be the cause of won't spin or drain.
  
  
• Leaks on the Floor: Leaks might result from loose hoses, worn-out door seals, or too strong detergent.
  
  
• Shakes and Motion Around – Bad shock absorbers, an imbalanced machine, or overloading might cause too much shaking.
  
  
• Smelly Drum – Mold and mildew buildup inside the machine can create an unpleasant odor.
  
  

How to Prevent It

• Clean the drain pump filter every few months to prevent blockages.
  
  
• Use the right detergent and don’t overload the drum.
  
  
• Check hoses for leaks and replace them every 5 years.
  
  
• Keep the machine level so it doesn’t shake or make noise.
  
  
• After each wash, leave the door slightly open to prevent mold.
  
  
• Once a month, run a hot cycle with vinegar or baking soda to keep odors away.

3. Dishwasher Problems

What Can Go Wrong?

• Dishes Come Out Dirty – Clogged spray arms, weak water pressure, or using the wrong detergent can lead to poor cleaning.
  
  
• Water Not Draining – A blocked drain hose, clogged filter, or broken pump could be the cause.
  
  
• Smells Bad – Trapped food debris in the filter or drain system leads to unpleasant odors.
  
  
• Cloudy Glassware – Hard water deposits or excess detergent might be leaving a residue.
  
  

How to Prevent It

• Rinse dishes before loading them to avoid food buildup.
  
  
• Clean the filter and spray arms at least once a month.
  
  
• Run a vinegar cycle every few weeks to prevent limescale and odors.
  
  
• Use a high-quality detergent and rinse aid to keep dishes sparkling clean.

4. Oven and Stove Issues

What Might Go Right and Wrong?

• Uneven Cooking: The guilty thermostat or heating element could be broken.
  
  
• The gas burner won't light. The problem can be a broken igniter or a choked burner.
  
  
• Oven Door Not Close Enough Heat loss might result from worn-out hinges or damaged gaskets.

How to Prevent It

• Regularly clean the burners and oven to avoid grease buildup.
  
  
• Use an oven thermometer to check if the temperature is accurate.
  
  
• Inspect the oven door seal and replace it if it’s damaged.
  
  

5. Dryer Problems

What Can Go Wrong?

• Takes Too Long to Dry Clothes – A clogged lint filter or blocked vent could be restricting airflow.
  
  
• Overheating – Poor airflow due to lint buildup can cause overheating and even fire hazards.
  
  
• Drum Won’t Spin – A broken belt, worn-out motor, or faulty rollers could be the issue.
  
  

How to Prevent It

• Clean the lint filter after every load.
  
  
• Check and clean the dryer vent every 6 months.
  
  
• Avoid overloading the dryer to prevent strain on the motor.
  
  
• If the drum isn’t spinning properly, inspect the belt and rollers.
  
  

6. Microwave Issues

What Can Go Wrong?

• Not Heating Food Properly – A faulty magnetron, broken diode, or defective door switch could be the cause.
  
  
• Turntable Won’t Rotate – The motor may be worn out, or the tray could be misaligned.
  
  
• Sparks Inside – Burnt food residue, metal objects, or a damaged waveguide cover might cause sparking.
  
  

How to Prevent It

• Keep the microwave clean at all times to avoid burnt food buildup.
  
  
• Never put metal objects inside the microwave.
  
  
• Regularly check the door seal for any gaps or damage.
  
  

7. Freezer Problems

What Can Go Wrong?

• Too Much Frost Buildup – A faulty defrost heater, excessive door opening, or high humidity can cause frost.
  
  
• Not Freezing Properly – Dirty condenser coils, a failing compressor, or incorrect temperature settings could be the issue.
  
  
• Weird Noises – A failing evaporator fan motor or ice buildup near the fan could be the cause.

How to Prevent It

• Close the freezer door as much as you can help to preserve a consistent temperature.
  
  
• Should excess ice develop, physically defrost the freezer.
  
  
• Don't overfill the freezer; excellent airflow helps to preserve correct cooling.
  
  
• To maintain the condenser coils working as they should, routinely clean them.
  
  

Final Thoughts

Maintaining your appliances need not be a chore. Preventing malfunctions and saving you money on expensive repairs depend much on a little maintenance. Simple routines include housekeeping, leak detection, and correct appliance use help to extend the lifetime and maintain their efficiency.

But if something goes wrong, don’t stress! FixUp Pro is here to help with fast and professional appliance repair in Winnipeg. Get your appliances back in top shape—schedule a repair today!